|
Radio South Safe-Switch
Regulator
This new safe-switch regulator
combines the best of our regulator with a switch harness that is "on"
in the "open" position! This means no more open switches
causing crashes! By using a regulator, you can ensure that you have enough
"head voltage" to keep the receiver from shutting down during
high-current drain maneuvers, especially with Digital servos.
Specifications:
- Size: 1.75” x .75” x
.50”
- Weight: .41 ounce
- Output current: 10 amps
- Benefits include
consistent “feel” in the model due to constant voltage
- Increased speed and
torque
- Longer servo life
- Switch is "on"
in the "open" position, meaning you will never have a defective
switch crash your
model again!
- Two versions are
available, 5.1v and 5.6v
output . Both will
work on 5-10 cell packs.
*Lifetime warranty covers the unit against failure of the electronics.
Warranty Service information:
Should you ever have to return any of our electronic equipment for service,
please follow these instructions:
-
Write a detailed letter with all important information about
the problem.
-
Pack the equipment well, in a sturdy box.
-
Ship the package to:
Hobby Electronics
107 South Ave.
Ft. Walton Beach, FL 32547
-
Should you need to check on the repair, please call
1-850-243-8144,
and ask for Charles Merriwether.
-
We try to keep the repair time short, but delays sometime
occur. If you have a question, please don't hesitate to call us.
-
Please include a check or money order for $5.00 to cover
return shipping. Make the check out to Hobby Electronics.
|
